FILTER-REGULATOR KIT 1/2 SY2 FR-D-AC BREATHING AIR

• very effective filter unit for compressed air and for breathing air
• removes moisture, grease, small particles, impurities and odors with the activated carbon filter
• suitable for painting, plasma cutters, breathing air and other devices where clean compressed air is required and odors must be filtered out
• all filters have replaceable filter cartridges

Syntesi filter SY2:

• RMSA: drain with manual condensate discharge and automatic discharge at zero pressure
• padlockable knob
• thread G 1/2"
• pressure gauge port or additional air take-off G 1/4"
• tank capacity 70 cm³
• degree of filtration 20 micron (output air purity class ISO8573-1: 4.7.4)
• max. operating pressure 13 bar
• flow rate at 6.3 bar (pressure drop 0.5 bar) 4300 Nl/min
• flow rate at 6.3 bar (pressure drop 1 bar) 7200 Nl/min
• relief valve flow rate at 6.3 bar 100 Nl/min
• additional air take-off flow rate at 6.3 bar 1400 Nl/min
• operating temperature -10...+50 °C
• fluid: compressed air or other inert gases
• mounting position vertical
• wall fixing screws M5
• weight 596 g

Syntesi depurator SY2:

• separates liquid and solid particles dispersed in the compressed air with a high degree of efficiency
• RMSA: drain with manual condensate discharge and automatic discharge at zero pressure
• thread G 1/2"
• port for additional air take-off G 1/4"
• tank capacity 40 cm³
• degree of filtration 0.01 (output air purity class ISO8573-1: 1.7.2)
• max. operating pressure 13 bar
• max. flow rate on regulation at 6.3 bar 620 Nl/min
• additional air take-off flow rate at 6.3 bar 1500 Nl/min
• operating temperature -10...+50 °C
• mounting position vertical
• wall fixing screws M5
• weight 456 g

Syntesi active carbon filter SY2:

• activated carbon filtering systems achieve the highest standard of purification possible in industrial applications
• they eliminate all traces of oils, solvents and hydrocarbons and remove unpleasant odours
• RMSA: drain with manual condensate discharge and automatic discharge at zero pressure
• duration of cartridge 4000 h
• thread G 1/2"
• pressure gauge port or additional air take-off G 1/4"
• residual oil at 20°C 0.003 mg/m³ (standardi ISO8573-1: 1.7.1)
• max. operating pressure 13 bar
• max. flow rate on regulation at 6.3 bar 800 Nl/min
• additional air take-off flow rate at 6.3 bar 1500 Nl/min
• operating temperature -10...+50 °C
• installation in any position
• wall fixing screws M5
• weight 456 g