SKU:
MWP56001
Only few left
- very effective filter unit for compressed air and for breathing air
- removes moisture, grease, small particles, impurities and odors with the activated carbon filter
- suitable for painting, plasma cutters, breathing air and other devices where clean compressed air is required and odors must be filtered out
- all filters have replaceable filter cartridges
Syntesi filter SY1:
- RMSA: drain with manual condensate discharge and automatic discharge at zero pressure
- padlockable knob
- thread G 1/4"
- pressure gauge port or additional air take-off G 1/8"
- tank capacity 30 cm³
- degree of filtration 20 micron (output air purity class ISO8573-1: 4.7.4)
- max. operating pressure 15 bar
- flow rate at 6.3 bar (pressure drop 0.5 bar) 800 Nl/min
- flow rate at 6.3 bar (pressure drop 1 bar) 2000 Nl/min
- relief valve flow rate at 6.3 bar 70 Nl/min
- additional air take-off flow rate at 6.3 bar 500 Nl/min
- operating temperature -10...+50 °C
- fluid: compressed air or other inert gases
- mounting position vertical
- wall fixing screws M4
- weight 239 g
Syntesi depurator SY1:
- separates liquid and solid particles dispersed in the compressed air with a high degree of efficiency
- RMSA: drain with manual condensate discharge and automatic discharge at zero pressure
- thread G 1/4"
- port for additional air take-off G 1/8"
- tank capacity 15 cm³
- degree of filtration 0.01 (output air purity class ISO8573-1: 1.7.2)
- max. operating pressure 15 bar
- max. flow rate on regulation at 6.3 bar 460 Nl/min
- additional air take-off flow rate at 6.3 bar 500 Nl/min
- operating temperature -10...+50 °C
- mounting position vertical
- wall fixing screws M4
- weight 189 g
Syntesi active carbon filter SY1:
- activated carbon filtering systems achieve the highest standard of purification possible in industrial applications
- they eliminate all traces of oils, solvents and hydrocarbons and remove unpleasant odours
- RMSA: drain with manual condensate discharge and automatic discharge at zero pressure
- duration of cartridge 4000 h
- thread G 1/4"
- pressure gauge port or additional air take-off G 1/8"
- residual oil at 20°C 0.003 mg/m³ (standardi ISO8573-1: 1.7.1)
- max. operating pressure 15 bar
- max. flow rate on regulation at 6.3 bar 350 Nl/min
- additional air take-off flow rate at 6.3 bar 500 Nl/min
- operating temperature -10...+50 °C
- installation in any position
- wall fixing screws M4
- weight 350 g
Thread | G 1/4" -19 |
---|---|
Package length (cm) | 6.3 |
Package width (cm) | 16 |
Package height (cm) | 20.7 |
Gross weight (kg) | 0.623000 |
EAN | 6418914972667 |