SKU:
FM030241
Only few left
- steel body
- the models CP/D/L, CP/DI and CP/DD cushion valves are designed to eliminate or minimize shock, surge and overload conditions on hydraulic equipment
- they may be used with one or more cylinders (of equal displacement) in a multiple hydraulic circuit-regulating surge pressure without disturbing pressure demands of any other cylinder in the system
- under standard conditions, when a control valve is in neutral or hold position, the excess pressure created by overload, shock or stress has no possibility of relief through the primary relief valve
- cushion valves located between control valve and cylinders minimize or eliminate this condition
- sudden shock experienced in starting and stopping hydraulic motors may also be controlled by the same installation
- the need for an anti-cavitation check is eliminated
- relieved oil is directed into the opposite side of the cushion valve preventing cylinder or motor cavitation
- model CP40 / 38U
- max. flow 40 l/min
- thread P-T 3/8"R
Mitat (mm):
- A: 60 mm
- B: 55 mm
- C: 30 mm
- D: 48 mm
- E: 43 mm
- F: 6,25 mm
Package length (cm) | 3 |
---|---|
Package width (cm) | 6.1 |
Package height (cm) | 10.5 |
Gross weight (kg) | 0.696000 |
EAN | 6418914175303 |