SUCTION HOSE 10MM ARMORVINPRESS PU

• PVC hose with embedded reduced pitch galvanised steel spiral
• internal layer in polyurethane (PU)
• for suction and delivery of liquids and air in pneumatic, hydraulic oli and chemical industry
• produced according to FDA 21 CFR 177.2600 e/f (watery foodstuffs, fatty foodstuffs) standard
• good flexibility
• operating temperature -20...+90 °C
• inner/outer diameter 10x16
• bending radius 40 mm
• operating pressure 23 °C 17 bar
• explosion pressure 23 °C 51 bar
• explosion pressure 70 °C 23 bar
• weight 180 g/m
• thickness 3 mm

Use for e.g. (S: resistant / O: restricted resistance):

• ammonium chloride S
• boric acid S
• animal fats S
• glycols O
• hydraulic oils S
• air S
• lye, alkaline solutions S
• lactic acid S/O
• sea water S
• petroleum O
• sulphuric acid S
• soap solution S
• citric acid S
• nitric acid O
• urea (ADBLUE) S
• water S
• oil fuel S

Note! Check the more detailed chemical resistances from PU-table (attached PDF)