BATTERY CHARGER 12V 5A BLUETOOTH IP65

Features:

• Bluetooth built-in enables you to see the information from your charger on your smartphone, tablet or computer by using the VictronConnect application
• IP65 water, dust and chemical resistant
• 7 step smart charge algorithm
• recovery of fully discharged dead batteries
• automatic power supply function
• severe cold performance down to -30 °C
• several other battery life enchanging featues
• low power mode to charge smaller batteries
• memory function: case of power failure battery charger use a car battery as a back-up power source (to preserve charging memory) and continue to charge the battery from interrupted phase when the power is restored
• suitable for charging lead-acid batteries (AGM, gel and unsealed batteries)
• note! suitable also for charging Li-ion batteries (LiFePO4)

Technical information:

• input voltage range 180 - 265 VAC
• efficiency 94 %
• standby power consumption 0,5 W
• charge voltage, absorption: normal 14,4 V / high 14,7 V / Li-ion 14,2 V
• charge voltage, float: normal 13,8 V / high 13,8 V / Li-ion 13,5 V
• charge voltage, storage: normal 13,2 V / high 13,2 V / Li-ion 13,5 V
• charge current 5 A
• low current mode 2 A
• temperature compensation (lead-acid batteries only) 16 mV/°C
• can be used as power supply (always follow instructions of your car’s manual)
• back current drain 0,7 Ah / kk (1 mA)
• protection: reverse polarity / output short circuit / overheating
• operating temperature -30...+50 °C (full rated output up to 30 °C) cables retain flexibility at low temperature
• humidity (non-condensing) max. 95 %

Enclosure:

• battery connection: 1,5 m cable with 20 A DC connector, clamps and M8 eyelets
• 230 V AC connection: 1,5 m cable CEE 7/17, BS 1363 plug (UK) or AS/NZS 3112 plug
• protection class IP65
• dimensions 47 x 95 x 190 mm / other 60 x 105 x 190 mm
• weight 0.9 kg

Standards:

• safety EN 60335-1, EN 60335-2-29
• emission EMC EN 55014-1, EN 61000-6-3, EN 61000-3-2
• immunity EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3

Standard accessories:

• clamps, M8 eyelets