CENTRAL LUBRICATION DIVIDER 6 OUTLET
SKU:
KV0106
Only few left
- progressive distributors distribute the same amount of lubricant to each outlet
- the piston mechanism inside the blocks ensures that if one of the lines is blocked, the mechanism is locked and does not allow grease to enter other lines
- this allows you to notice any possible blockage of the line in time and prevents damaging the machine
- can be operated with a manual grease gun or an automatic central lubrication pump
- always clean the nipple before using the grease gun
- nipple centering ease the greasing of machines and equipment with several objects and which may be in dirty, cramped or otherwise awkward places
- the central lubrication system can always be used with the lubricant recommended by the machine manufacturer, up to NLGI 2
- the system eliminates the need to switch to a more fluid lubricant even in winter, unless recommended by the machine manufacturer
- 6 outputs from which 3-6 channels can be modified as required
- package includes instructions for closing additional outputs, eg for 5 outputs
- the lubricant is distributed equally between all outputs of the distributor, eg each output of a 6-output distributor distributes 1/6 of lubricant
- if the second output of the output pair is switched off, then that amount of grease is also directed to the open one, this way the amount of grease at the other output can be increased
- distributor output thread M10x1
- max. operating pressure 300 bar
- service temperature -35...+80 °C
- includes 3 pcs blind plugs and 6 pcs couplers
| Thread | M10 x 1,0 (fine thread) |
|---|---|
| Package length (cm) | 6 |
| Package width (cm) | 9 |
| Package height (cm) | 4 |
| Gross weight (kg) | 0.758000 |
| EAN | 6418914197428 |
Related Products
