SLIDING DOOR HARDWARE KIT 2000MM STEEL/ BLACK

• colour black
• material powder-coated steel
• total rail length 2 m
• height of rail 40 mm
• rail depth 6.5 mm
• load capacity max. 100 kg
• door panel width max. 100 cm
• door panel thickness 40-45 mm
• kit includes: 2 x sliding rails, 2 x bearing rollers, 2 x door stops, 1 x floor guide, 2 x jump guards, 5 x mounting brackets
• the kit allows you to build a trendy barn door-style sliding door with a wheeled mechanism
• timeless choice for different interior designs and spaces
• get a unique look by choosing a door panel to suit your style
• kit includes sliding rail, bearing rollers with arms and the needed hardware for one door panel
• door panel not included
• the kit is intended for indoor use

Good to know about the dimensioning of the kit and sliding doors:

Single-panel sliding door: In order for the door to have sufficient space to move in front of the door opening, the rail installed on either side of the door opening must be at least twice the width of the panel. Double-panel sliding doors: When there are two doors and they slide on both sides of the door opening, the rail must be at least four times the width of one door panel, ie at least twice as wide as the total width of the doors. The height of the door panel is dimensioned so that the door panel is higher than the door opening. A spacing of 10 mm must be left between the floor and door panel for unobstructed sliding. Check the floor levelness and if there is a slope, more spacing is needed. The installation height of the center of the rail is obtained by calculating the height of the door panel from the floor + 43 mm. A double panel sliding door can be made using two kits. In this case, the rails are installed butted A connecting piece is not required between the rails as the doors do not slide over the joint. More detailed installation instructions included in the package and attachment.