SKU:
HK5065
Item available
- TEROSON EP 5065 is a solvent free, two component adhesive, based on epoxy resins
- it has high final strength both at high and low temperatures (-40...+80°C)
- curing can be obtained with both low and high temperature
- the cured adhesive film is hard, but not brittle
Application areas:
- TEROSON EP 5065 is mainly used in car repair for structural bonding of metals when requirements in terms of crash behaviors are high (e.g., car body steel with or without e-coat, galvanized steel and aluminum)
- coated surfaces are protected against corrosion
- curing can take place at room temperature or be accelerated by the use of additional heat, e.g. ir radiator
- the assembly bonded shall be designed so that the bonded surface or seams are only subjected to tensile or shear forces, but not to peel forces
- it is recommended that bonding should be done with single overlaps
- uncured adhesive can be spot-welded
Package length (cm) | 25.5 |
---|---|
Package width (cm) | 6.5 |
Package height (cm) | 5 |
Gross weight (kg) | 0.360000 |
EAN | 4002872014266 |